How to Remove Green Algae and Moss from Wooden Decking – The Easy Way with Batavia Brushes

Wooden decking adds warmth and character to any outdoor space — but over time, it’s prone to green algae, moss, and grime. These organic buildups not only make your deck look neglected but also create slippery and unsafe surfaces.

In this blog, you'll learn how to safely and effectively clean your wooden decking using the Batavia Maxx Brush and Twin Brush — without pressure washers or harsh chemicals.

Why Does Green Algae Form on Decking?

Wood absorbs moisture easily, making it a breeding ground for:

Green algae in shaded or damp areas
Moss in the gaps between boards
Dirt and mildew from rain, leaves, and foot traffic

These conditions are common after winter or long periods of rain.

Why You Should Avoid Pressure Washing Decking

While pressure washers can remove surface dirt, they often:

❌ Damage wood fibers
❌ Strip protective coatings
❌ Leave gouges or splinters
❌ Push water deep into the timber

Instead, use rotating brush technology for safer, deeper cleaning.

Batavia Maxx Brush: Heavy-Duty Deck Cleaning Power

The Batavia Maxx Brush is a powerful electric surface brush designed to clean large, flat outdoor areas like wooden decks, boardwalks, and terraces.

Features:

Rotating steel or nylon brush heads for moss and algae
Ergonomic handle and adjustable height
Splash guard and guide roller for control
Works on wood, composite, stone, and tiles

Perfect for:

Full deck restorations
Prepping for re-staining or oiling
Large surface areas with built-up dirt

✅ Removes algae and moss deep from the wood grain — without damage.

Batavia Twin Brush: For Corners, Edges, and Smaller Decks

The Batavia Twin Brush is your go-to tool for:

Deck steps and narrow planks
Edges along walls or planters
Deck railings or built-in seating

Features:

Dual rotating brushes for powerful, targeted cleaning
Cordless and lightweight
Ideal for curved, vertical, or small surface areas
Works with water or mild soap

✅ The perfect tool for detail work or smaller decking zones.

Step-by-Step: How to Clean Green Deposits from Wooden Decking

Clear the deck – Remove furniture, planters, and debris
Rinse lightly to loosen dirt and soften buildup
Use the Maxx Brush for the main surface area
Switch to the Twin Brush for corners, sides, or railings
Rinse off loosened algae and dirt
Allow the deck to dry fully

Tip: Use in dry weather for best results and long-lasting cleanliness.

Aftercare and Maintenance Tips

Apply a decking oil or sealant after cleaning
Trim plants and bushes nearby to reduce shade
Clean your deck 2–3 times per year, especially after winter
Use Batavia brushes routinely for low-maintenance care

Why Batavia Brushes Are the Best Choice for Deck Cleaning

✅ No high-pressure damage
✅ Eco-friendly – no chemicals needed
✅ Effective on all wood types – hardwood, softwood, and composite
✅ Saves hours compared to manual scrubbing

Revive your decking the smart way. With the Batavia Maxx Brush and Twin Brush, you can restore and protect your outdoor wood surfaces — without stress or surface damage.